5
6
Connecting to the external power:
1. T
2. Switch on the power (within stated voltage).
ear off the glue cloth fixed on the bottom rod,ensure the bottom rod is not stuck by the casing.
LAN
How to use Manual/Remote Control Switch Button: (Figure 18)
The screen has four kinds of optional control methods: IR Remote Control, Manual Control, Trigger Control, External
Control (Central Control or RS232/USB). When switching the Manual/Remote Control Switch Button to position "1",
you can use Manual Control or Trigger to control up/pause/down of the screen. When switching to position "0", you
can use IR Remote Control or External Control (Central Controller or Rs232/USB) to control up/pause/down of the
screen.
Manual/Remote Control
Switch Button
Trigger Jack
Central Controller
Manual Control
Connecting External IR
Projector
Computer Output
Jack
How to use manual switch control:
1. Switch Manual/Remote Control Button to position "1" (manual stalls).
2. " " ; it will come down slowly. When it is all the way down, it will
stop automatically (Figure 20) .
3. Turn the switch to " " to retract the screen; it will go up into the metal casing. When it is all the way up,
it will stop automatically (Figure 21).
4. To stop any time while the screen is in motion, turn the switch to 0.
Turn the switch to position to lower the screen
position
Figure 18
Figure 19 Figure 20 Figure 21
Manual
Control
Operation Instruction
Instructions
UP
DOWN
STOP
1GD IRA
LED remote controller
signal instruction light
Caution:
1. Controller will work within 30 degree away horizontally
from the center of receiver point within 8 meters from
the screen.
2. The controller will not work if the signal is covered
something.
3. Keep the controller far away from high temperature and
humid situation.
4. Please change the battery when the signal is weak.
5. Please take the battery out if the controller was not
being used for long time.
6. Please choose the same type battery as original supplied.
by
How to install the battery:
1.Turn the controller around, push to open the cover as
guide arrow.
2.Put the battery in according to the guide of cathode
anode.
3.Close the cover.
and
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals