Optoma DC300I User Manual download pdf (Page 10)

8. OPERATING THE VISUALISER

Powering on

After connecting the external power supply the red led in the centre of the DC300i will

flash. This indicates the unit is in standby mode. To start the visualiser simply press the

power on button via the main control panel or the remote control. The led will turn to

green. Please Note: It takes 3~4 seconds before the visualiser is fully powered and

ready to use.

Connecting the Visualiser

This is simplicity itself. Using the supplied 15 pin VGA cable connect between the

visualiser and the output devise i.e. Projector or monitor/TV. Via the 15pin VGA port.

USB Connection

The USB port allows you to view the camera output via the PC. You will need to install

the PC software which is described later in this manual. Once connected it will allow

you to record endless pictures and video files (depending on your Hard Disk capacity).

The software also provides simple annotation of images.

Positioning the Camera – Rotation & Mirror

Normally the camera is positioned over documents and objects alongside the visualiser.

Using the remote control you can rotate the image through 180 degree increments

so that the captured image appears straight to the viewer. You can also use the mirror

function in a similar way. Using the combination of rotation and mirror functions

means you have flexibility when positioning the camera.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

Optoma DC300I User Manual Page 10