Optoma HD25E User's Guide download pdf (Page 54)

English

Appendices

Image has slanted sides:

If possible, reposition the projector so that it is centered on the `

screen and below the bottom of the screen.

Use “Display-->V Keystone” from the OSD to make an adjust- `

ment.

Image is reversed

Select “Setup-->Projection” from the OSD and adjust the pro- `

jection direction.

The projector stops responding to all controls

If possible, turn off the projector, then unplug the power cord `

and wait at least 60 seconds before reconnecting power.

Check that “Keypad Lock” is not activated by trying to control `

the projector with the remote control.

Blurry double image

Press “3D Format” button and switch to “Off” to avoid normal `

2D image is blurry double image.

Two images, side-by-side format

Press “3D Format” button and switch to “SBS” for input signal `

is HDMI 1.3 2D 1080i side-by-side.

Image does not display in 3D

Check if the battery of 3D glasses is drained. `

Check if the 3D glasses is turned on. `

When the input signal is HDMI 1.3 2D (1080i side-by-side `

half), press “3D Format” button and switch to “SBS”.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 71 72

No comments

Optoma HD25E User's Guide Page 54