Optoma S313 User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 67
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
EN-22
Connecting an S-Video source device
Examine your Video source device to determine if it has an unused S-Video
output socket available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to an S-Video source device:
1. Take an S-Video cable and connect one end to the S-Video output
socket of the Video source device.
2. Connect the other end of the S-Video cable to the
S-VIDEO
socket on the
projector.
Important
If the selected video image is not displayed after the projector is turned on and
the correct video source has been selected, check that the Video source
device is turned on and operating correctly. Also check that the signal cables
have been connected correctly.
If you have already made a Component Video connection between the
projector and this S-Video source device using Component Video connections,
you need not connect to this device using an S-Video connection as this
makes an unnecessary second connection of poorer picture quality. See
“Connecting Video source devices” on page 20 for details.
Connecting a composite Video source device
Examine your Video source device to determine if it has a set of unused
composite Video output sockets available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to a composite Video source device:
1. Take a Video cable and connect one end to the composite Video output
socket of the Video source device.
2. Connect the other end of the Video cable to the
VIDEO
socket on the
projector.
Important
If the selected video image is not displayed after the projector is turned on and
the correct video source has been selected, check that the Video source
device is turned on and operating correctly. Also check that the signal cables
have been connected correctly.
You need only connect to this device using a composite Video connection if
Component Video and S-Video inputs are unavailable for use. See
“Connecting Video source devices” on page 20 for details.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 66 67

Comments to this Manuals

No comments