Replacing and cleaning the optional
dust lter
We recommend cleaning the dust lter after every 500 hours of use,
clean it more often if the projector is used in a dusty environment.
The usage time of the dust lter is reached.
Please clean the dust lters for better performance.
Warning! Dust Filters
When you see this message, please nd following steps for cleaning
procedure:
Lamp Replacement Procedure:
1. Switch off the projector power by pressing the “ ” button.
2. Disconnect the power cord.
3. Pull the latch by the arrow direction. 1
4. Remove the dust lter slowly and carefully.
5. Clean or replace the dust lter. 2
To install the dust lter, reverse the previous steps.
6. Turn on the projector and use “Reset Dust Filter” after the dust lter is re-
placed.
The optional dust
lter should be
used in dusty
environments.
If the dust lter is
installed, proper
maintenance will
prevent overheat-
ing and related
damage to the
projector.
1
2
Comments to this Manuals