Optoma X402 User Manual download pdf (Page 66)

English

Appendices

Lamp Replacement Procedure:

1. Switch off the power to the projector by pressing the “ ” button on the remote

control or on the Keypad of the projector.

2. Allow the projector to cool down for at least 30 minutes.

3. Disconnect the power cord.

4. Unscrew the one screw on the cover. 1

5. Push up and remove the cover. 2

6. Lift up the lamp handle. 3

7. Press on the both sides then lift up and remove the lamp cord. 4

8. Unscrew the one screw on the lamp module. 5

9. Lift up the lamp handle 6 and remove the lamp module slowly and carefully. 7

To replace the lamp module, reverse the previous steps.

10. Turn on the projector and reset the lamp timer.

Lamp Reset: (i) Press “Menu”  (ii) Select “OPTIONS”  (iii) Select

“Lamp Settings”



(iv) Select “Lamp Reset”



(v) Select “Yes”.

The screw on the

lamp cover and the

lamp cannot be

removed.

The projector

cannot be turned

on if the lamp

cover has not been

placed back on the

projector.

Do not touch the

glass area of the

lamp. Hand oil can

cause the lamp to

shatter. Use a dry

cloth to clean the

lamp module if it

was accidentally

touched.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 78 79

No comments

Optoma X402 User Manual Page 66