Optoma S313 User Manual download pdf (Page 61)

EN-61

Troubleshooting

Refer to the symptoms and measures listed below before sending the pro-

jector for repairs. If the problem persists, contact your local reseller or ser-

vice center. Please refer to "LED Indicator Messages" as well.

Start-up

If no lights turn on:



Be sure that the power cord is securely connected to the projector and the

other end

is plugged into an outlet with power.

 Press the power button again.



Unplug the power cord and wait for a short while, then plug it in and press

the power

button again.

Image

If the searching source is displayed:



Press

SOURCE

on the projector or

Source

on the remote control

to select

an active input source.

 Be sure the external source is turned on and connected.



For a computer connection, ensure your notebook computer’s external

video port is

turned on. Refer to the computer manual.

If the image is out of focus:



While displaying the on-screen menu, adjust the focus ring. (The image

size should

not change; if it does, you are adjusting the zoom, not the

focus.)

 Check the projection lens to see if it needs cleaning.

If the image is flickering or unstable for a computer connection:

 Press

“

”

, go to IMAGE > Advanced > Signal and adjust Phase or

Frequency.

Remote control

If the remote control does not operate:

 Be sure nothing is blocking the remote control receiver on the front of the

projector. Use the remote control within the effective range.

 Aim the remote control at the screen or at the front of the projector.



Move the remote control so it is more directly in front of the projector and

not as far to the side.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67

Comments to this Manuals

No comments

Optoma S313 User Manual Page 61

Comments to this Manuals

Related products and manuals for Projectors Optoma S313